## Drum Kit
+<img src="http://farm9.staticflickr.com/8074/8257699966_7585ca06e7.jpg" width="375" height="500" alt="Code Club Miniband"><
+
### 1. Make your drums
Take your 4 piezo buzzers and attach a ring of Sugru (or other modelling material) as shown in the picture.
This will increase the flexibility and resonance of the sensors. Let the sugru set.
+<img src="http://farm9.staticflickr.com/8353/8256628815_6c3872d3ac.jpg" width="500" height="375" alt="Code Club Miniband">
+
### 2. Connect the circuit
Repeat for each of your drums. It is easiest to use a bread board for making your circuit.
Look at the picture for an example.
+<img src="http://farm9.staticflickr.com/8081/8256628955_f65a76b6fb.jpg" width="500" height="375" alt="Code Club Miniband">
### 3. Program the Arduino
## Guitar
+<img src="http://farm9.staticflickr.com/8070/8257698984_8471e4cf57.jpg" width="500" height="375" alt="Code Club Miniband">
+
### 1. Make your guitar
Grab your strip potentiomater, a piece of thin card, and a pencil.
Signal will come from the centre pin, so connect that to one of your analogue inputs and you should be good to go.
+<img src="http://farm9.staticflickr.com/8363/8257699194_a2645e0e06.jpg" width="500" height="375" alt="Code Club Miniband">
### 3. Program the Arduino