From: KatJoyWhite <kathryn.joy.white@gmail.com>
Date: Sun, 9 Dec 2012 11:57:21 +0000 (+0000)
Subject: Update README.md
X-Git-Url: https://git.njae.me.uk/?a=commitdiff_plain;h=04ad604e7ee0f93ec891b94f7171601d9a1d2483;p=miniband.git

Update README.md
---

diff --git a/README.md b/README.md
index a96ba6d..2d0069f 100644
--- a/README.md
+++ b/README.md
@@ -64,6 +64,18 @@ Tape a pencil or stick to the back of the guitar to make it stiffen the fret boa
 
 ### 2. Connect the circuit
 
+The strip just adjusts resistance, so you will need to feed it some electricity.
+Run +5V into one of the strip’s outer pins, and ground into the other outer pin.
+It doesn’t matter which way around you connect these, but it will affect which the direction
+the fretboard runs (high and the top, low at the bottom or vice-versa).
+
+Signal will come from the centre pin, so connect that to one of your analogue inputs and you should be good to go.
+
+### 3. Set up in Scratch
+
+
+
+## Maracas
 
 ## Pull-down Resistors