From 04ad604e7ee0f93ec891b94f7171601d9a1d2483 Mon Sep 17 00:00:00 2001 From: KatJoyWhite Date: Sun, 9 Dec 2012 11:57:21 +0000 Subject: [PATCH] Update README.md --- README.md | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/README.md b/README.md index a96ba6d..2d0069f 100644 --- a/README.md +++ b/README.md @@ -64,6 +64,18 @@ Tape a pencil or stick to the back of the guitar to make it stiffen the fret boa ### 2. Connect the circuit +The strip just adjusts resistance, so you will need to feed it some electricity. +Run +5V into one of the strip’s outer pins, and ground into the other outer pin. +It doesn’t matter which way around you connect these, but it will affect which the direction +the fretboard runs (high and the top, low at the bottom or vice-versa). + +Signal will come from the centre pin, so connect that to one of your analogue inputs and you should be good to go. + +### 3. Set up in Scratch + + + +## Maracas ## Pull-down Resistors -- 2.34.1