Update README.md

[miniband.git] / README.md

diff --git a/README.md b/README.md
index 8b77b6ed330895eb8c518be369d27a23c4fed346..7016b2a1a1c97471995eb1772c983573f8b985cb 100644 (file)
--- a/README.md
+++ b/README.md
@@ -55,11 +55,15 @@ A better explanation can be found [here](http://arduino.cc/en/Tutorial/DigitalPi
 
 ## Drum Kit
 
+<img src="http://farm9.staticflickr.com/8074/8257699966_7585ca06e7.jpg" width="375" height="500" alt="Code Club Miniband"><
+
 ### 1. Make your drums
 
 Take your 4 piezo buzzers and attach a ring of Sugru (or other modelling material) as shown in the picture. 
 This will increase the flexibility and resonance of the sensors. Let the sugru set.
 
+<img src="http://farm9.staticflickr.com/8353/8256628815_6c3872d3ac.jpg" width="500" height="375" alt="Code Club Miniband">
+
 
 ### 2. Connect the circuit
 
@@ -68,6 +72,7 @@ Connect one lead from your buzzer to one of your analogue inputs, and connect th
 Repeat for each of your drums. It is easiest to use a bread board for making your circuit. 
 Look at the picture for an example.
 
+<img src="http://farm9.staticflickr.com/8081/8256628955_f65a76b6fb.jpg" width="500" height="375" alt="Code Club Miniband">
 
 ### 3. Program the Arduino
 
@@ -81,6 +86,8 @@ Find four different drum sounds (or whatever sounds you'd like your drums to mak
 
 ## Guitar
 
+<img src="http://farm9.staticflickr.com/8070/8257698984_8471e4cf57.jpg" width="500" height="375" alt="Code Club Miniband">
+
 ### 1. Make your guitar
 
 Grab your strip potentiomater, a piece of thin card, and a pencil. 
@@ -98,6 +105,7 @@ the fretboard runs (high and the top, low at the bottom or vice-versa).
 
 Signal will come from the centre pin, so connect that to one of your analogue inputs and you should be good to go.
 
+<img src="http://farm9.staticflickr.com/8363/8257699194_a2645e0e06.jpg" width="500" height="375" alt="Code Club Miniband">
 
 ### 3. Program the Arduino
 
@@ -111,6 +119,8 @@ Find five different guitar sounds and upload to Scratch.
 
 ## Maracas
 
+<img src="http://farm9.staticflickr.com/8346/8257698652_4a99ee24b4.jpg" width="500" height="375" alt="Code Club Miniband">
+
 ### 1. Make your maracas
 
 Cut 2 short lengths of drinking straw for your maraca handles. 
@@ -119,12 +129,14 @@ Push the maraca heads onto the straws and mold into a maraca shape.
 Connect lengths of wire to the connectors of the 2 tilt sensors and then push each sensor into a straw until it presses into the Sugru.
 Leave the Sugru to set.
 
+<img src="http://farm9.staticflickr.com/8222/8256627511_118192e52f.jpg" width="500" height="375" alt="Code Club Miniband">
 
 ### 2. Connect the circuit
 
 Connect the +5V port on the Arduino board to one of the pins on the tilt switch (it doesn't matter which way round).
 Connect the other pin to an empty digital input on the board. 
 
+<img src="http://farm9.staticflickr.com/8348/8257698572_4157db0b20.jpg" width="500" height="375" alt="Code Club Miniband">
 
 ### 3. Program the Arduino
 
@@ -136,6 +148,13 @@ Find the appropriate code from the respository and upload to your Ardunio board.
 Find a maraca / shaker sound and upload to Scratch.
 
 
+## Connecting to the Raspberry Pi
+
+Set up your Raspberry Pi with a power supply and monitor. 
+Connect all your Ardunio boards (it's easiest to have one per instrument!) to the Raspberry Pi using USB. 
+You will probably need a USB hub.
+
+
 ## Python glueware
 
 Download the music-maker-hander.py file from the repository. Run it with