## Drum Kit
+<img src="http://farm9.staticflickr.com/8074/8257699966_7585ca06e7.jpg" width="375" height="500" alt="Code Club Miniband"><
+
### 1. Make your drums
Take your 4 piezo buzzers and attach a ring of Sugru (or other modelling material) as shown in the picture.
This will increase the flexibility and resonance of the sensors. Let the sugru set.
+<img src="http://farm9.staticflickr.com/8353/8256628815_6c3872d3ac.jpg" width="500" height="375" alt="Code Club Miniband">
+
### 2. Connect the circuit
Repeat for each of your drums. It is easiest to use a bread board for making your circuit.
Look at the picture for an example.
+<img src="http://farm9.staticflickr.com/8081/8256628955_f65a76b6fb.jpg" width="500" height="375" alt="Code Club Miniband">
### 3. Program the Arduino
## Guitar
+<img src="http://farm9.staticflickr.com/8070/8257698984_8471e4cf57.jpg" width="500" height="375" alt="Code Club Miniband">
+
### 1. Make your guitar
Grab your strip potentiomater, a piece of thin card, and a pencil.
Signal will come from the centre pin, so connect that to one of your analogue inputs and you should be good to go.
+<img src="http://farm9.staticflickr.com/8363/8257699194_a2645e0e06.jpg" width="500" height="375" alt="Code Club Miniband">
### 3. Program the Arduino
## Maracas
+<img src="http://farm9.staticflickr.com/8346/8257698652_4a99ee24b4.jpg" width="500" height="375" alt="Code Club Miniband">
+
### 1. Make your maracas
Cut 2 short lengths of drinking straw for your maraca handles.
Connect lengths of wire to the connectors of the 2 tilt sensors and then push each sensor into a straw until it presses into the Sugru.
Leave the Sugru to set.
+<img src="http://farm9.staticflickr.com/8222/8256627511_118192e52f.jpg" width="500" height="375" alt="Code Club Miniband">
### 2. Connect the circuit
Connect the +5V port on the Arduino board to one of the pins on the tilt switch (it doesn't matter which way round).
Connect the other pin to an empty digital input on the board.
+<img src="http://farm9.staticflickr.com/8348/8257698572_4157db0b20.jpg" width="500" height="375" alt="Code Club Miniband">
### 3. Program the Arduino